AC Plumbing

24/7 Mon to Sun

We're Open

5-Star Service ★★★★★

How To Fix A Leaking Tap

dripping-tap

Leaking taps can be a headache, causing incessant dripping sounds and stealthily hiking up your water bills. Before you run to your local hardware store for replacements, let’s grasp the basics: understanding your water supply, the function of a washer and jumper valve, and identifying the type of tap in your sanctuary.

In this guide, we’ll navigate the nuances of DIY plumbing, empowering you to arrest that troublesome water flow with confidence and ease. Ready to turn your drips into triumphs? Let’s tighten our wrenches and dive in.

Understanding Common Issues With Taps

Before we go into the specifics of fixing a leaking tap, let’s take a look at some common issues you may encounter with your taps.

Water Pressure

High or low water pressure can turn a gentle stream into a trickle or a fountain. Issues with pressure often reveal underlying plumbing problems or signal that a tap’s internal mechanism, particularly the tap bonnet, is due for a checkup. Balanced water pressure is crucial for a tap’s optimal performance.

Broken Washers

A washer is the unsung hero in the tap’s anatomy, ensuring a watertight seal. Over time, the constant friction can wear it down, leading to the common nuisance where your tap is dripping. Regularly checking the washer can prevent those sneaky leaks.

Loose Parts

If your tap has a metal body and spindle that feel a bit wobbly, it’s likely due to loose parts. This can cause erratic water flow and sometimes even create that frustrating leak. Ensuring everything is snugly fitted can alleviate these symptoms.

O Ring Problems

The O ring sits stealthily within the tap, often out of sight beneath the tap bonnet, and seals the gap between parts. When it fails, the tap leaks, which although might seem minor, can be the start of your plumbing problems if left unattended.

Damaged Cartridge

Taps with damaged cartridges are a common sight in many households. The cartridge is the central hub for controlling water flow and temperature. If flawed, it can lead to a dripping tap, meaning it’s time for a thorough inspection and potential replacement.

Ball Taps

Ball taps, identified by their single handle and spherical cap, have several small parts that can wear out. While innovative, they are not immune to wear, and a damaged ball tap will result in a leaking or dripping problem that requires attention.

Corroded Valve Seat

At the intersection of the tap’s body and spindle, the valve seat can succumb to corrosion, a silent destroyer of taps. This corrosion often leads to gaps where water slips through, causing the tap to leak persistently.

Pipe Issues

Pipes play a pivotal role in delivering water, and issues within them, such as blockages or wear, can reflect in the tap’s performance. They are the hidden highways of your plumbing system, often overlooked until a leaking tap flags a potential issue.

Corrosion

Corrosion is an insidious adversary to taps, slowly degrading parts over time. The tap’s exterior might look intact, but inside, its core could be succumbing to the elements, inching towards inevitable leaks. Regular inspection helps in catching and mitigating this silent threat.

DIY Solutions for Fixing Leaking Taps – Step-by-Step Guide

Fixing your leaking tap requires careful attention and a systematic approach. Here is a step-by-step guide to help you tackle the most common issues that result in leaking taps.

Step 1: Turn Off the Water Supply

First things first, let’s turn the water supply off to prevent a mini flood in your home! Locate the valve under the sink and turn it clockwise until you can’t anymore. This will halt the water flow, allowing you to work on the tap without the surprise of an unexpected shower.

Step 2: Close the Drain

Before we dive into the nuts and bolts, close the drain or place a small towel over it. This is your best defense against the escape of tiny screws or parts down the drain. Plus, it will save you from the hassle of a drain rescue mission.

Step 3: Remove the Handle

Now, gently remove the tap handle. It’s often secured with a hidden screw, so hunt it out with your spanner or use a pair of pliers if you need to remove a stubborn one. Be careful not to scratch the tap body as you work.

Step 4: Expose the Cartridge or Valve

After the tap handle is off, you’ll see a cover plate that conceals the inside workings of the tap. Unscrew this to expose the cartridge or valve inside the tap body. If it’s stubborn, give it a little wiggle—just be gentle.

Step 5: Inspect and Replace the Washers or O-Rings

Check the washers or O-rings for signs of wear or damage. If you spot any issues, remove the old parts with a pair of pliers, and pop in the new ones. Remember, these small heroes prevent leaks by forming a tight seal inside the tap.

Step 6: Apply Plumber’s Tape (If Needed)

Sometimes, threads inside the tap may need a bit of reinforcement. This is where a plumber’s tape comes in handy. Just wrap a bit around the thread before you put the tap back together, and it will help prevent future leaks.

Step 7: Reassemble the Tap

Ready to bring your tap back to life? Reassemble all the parts in reverse order as you took them apart. Ensure everything fits nicely back into the body of the tap, forming a snug home for each component.

Step 8: Reattach the Tap Handle

Now, grab the tap handle and reattach it on top of the newly assembled tap body. Secure it firmly so that when the tap is turned, it feels as good as new. If the handle includes a cap or button, don’t forget to pop that on too.

Step 9: Test the Tap

The home stretch! It’s time to turn the water supply back on and give your tap a test run. Gently turn the tap, let the water flow, and check for any signs of leaks. If all is well, you’ve officially conquered the drip.

When to Call a Professional Plumber

If the tap in your home is still leaking after you’ve given the DIY a shot, it might be time to wave the white flag and call in the pros. Even if you’ve managed to replace the washer, there are things that need to be replaced or repaired that are just a bit beyond the reach of your trusty toolbox.

Leaking tap repairs often require a discerning eye and a skilled hand that knows just how tight is too tight or what that small drip really means. A professional plumber can ensure everything is done up to standard.

Plus, you’ll have peace of mind knowing that the repairs are backed by an expert’s touch. When it comes to comparing DIY vs professional, remember that a call to your local plumber could save you from future headaches and further water damage that can cost way more than a service fee.

Signs that You Need Professional Plumbing Services

A leaky tap, no matter how small, can be a sign of more significant plumbing issues. If you notice any of these signs, it’s time to call in the pros:

  • A persistent leak that won’t stop
  • Rust or sediment buildup on your tap
  • Water pressure issues with multiple taps in your home
  • Strange noises when you turn on the tap
  • DIY fixes that don’t seem to work
  • Visible damage or corrosion on any part of the tap

Don’t wait for the problem to escalate; call a plumber as soon as you notice any of these signs for proper repairs and maintenance. Remember, prevention is always better than a costly cure.

Understanding the Role of Ceramic Discs in Tap Repair

Ceramic discs have become a game-changer in the realm of tap mechanisms, replacing the traditional tap washers that often wear out and need to replaced. When we need to turn on a tap, the ceramic discs glide over each other to create a watertight seal; they are durable and provide a long-lasting solution to fix a dripping tap.

If you find yourself wrestling with an older tap that’s succumbed to the drip-drip-drip chorus, it may be time to upgrade to a ceramic disc-based tap. You’ll save both water and your sanity in the long run.

However, if you are unsure or the task seems daunting, don’t hesitate to call a plumbing professional who can ensure the job is done right, giving you peace of mind and dry hands.

Get Professional Help Today

Tap is leaking due to many reasons and you can easily fix it with these simple steps. If the DIY doesn’t work, don’t worry! Just call a professional plumber to get rid of all your tap troubles.

AC Plumbing offers reliable leaking tap repair services in Brisbane and surrounding areas. Our master plumbers are equipped with the latest tools and knowledge to provide top-notch tap repairs and maintenance services.

Don’t let that pesky drip keep you up at night; contact us today for a quick and efficient solution! So, why wait? Call AC Plumbing now!

Enquire Online for a QUICK Response!

Why Choose Us?

  • Fully Licensed & Insured
  • Prompt Service
  • Honest, Friendly Plumbers
  • Lifetime Warranty*
  • Fixed Pricing

Reviews

steve-goodwin
Steve Goodwin

★★★★★

Contacted by Facebook 7pm to ask about fixing a concealed leak. Responded almost immediately, organised to come out next day. Turned up earlier, found the leak quickly and fixed that, as well as upgrading some taps, and replacing a water pump…
Megan Fisher

★★★★★

The AC team were great. From the very first phone call with Leanne to Andrew turning up the team were professional and friendly. Andrew made helpful observations and did a great (and fast) job of getting the job done.
Kevin Perry

★★★★★

Highly recommend. I called AC Plumbing at 11:30am to get a quote on replacing a Hot Water system. They were there in 30 minutes and the quote was very reasonable. I booked with them straight away and the job was done in under 4 hours…
Scroll to Top