AC Plumbing

24/7 Mon to Sun

We're Open

5-Star Service ★★★★★

What Is the Method of Backflow Prevention?

What Is the Method of Backflow Prevention

Backflow prevention methods include using air gaps, various mechanical devices like reduced pressure zone (RPZ) devices or double check valves, and ensuring proper installation and maintenance of these devices. The choice of method depends on the specific backflow risk and the relevant regulations. These methods are critical for preventing contaminated water from flowing back into the potable water supply and maintaining the safety of Brisbane’s water system.

Air Gaps

An air gap is a physical separation between the water outlet and the highest level of possible water in a fixture or container. It is the most basic and effective way to prevent reverse flow into the clean water supply.

Common in residential settings like sinks and dishwashers, air gaps prevent contaminated water from siphoning back into the water main. They are ideal for low hazard properties where the potential for contamination is minimal. Air gaps require no mechanical parts, making them reliable and low maintenance.

Reduced Pressure Zone (RPZ) Devices

RPZ devices are testable backflow prevention devices suitable for high hazard conditions. These devices include two check valves with a relief valve in between. If either check valve fails, the relief valve will open to discharge water, ensuring that contaminated water cannot flow back into the supply line.

RPZ devices must be installed by a licensed plumbing contractor and require annual testing to remain compliant with Brisbane and Queensland regulations. They are commonly used in industrial settings, irrigation systems, and where chemical substances may be present.

Double Check Valve Assemblies (DCVA)

DCVAs are another type of testable backflow prevention device, designed for medium hazard properties. They contain two independent check valves in series. If one fails, the second provides redundancy to prevent reverse flow.

These devices are used in commercial buildings, fire sprinkler systems, and large-scale irrigation systems. Although they do not have a relief valve, they are suitable where water sources present a moderate risk. Regular testing and maintenance ensure their continued effectiveness.

Single Check Valves

Single check valves offer a basic level of backflow protection for low hazard scenarios. These non-testable backflow devices allow water to flow in only one direction and prevent minor backflow due to pressure fluctuations.

They are commonly installed in domestic plumbing systems, including water meters and water heaters. While they are cost-effective, they do not provide protection against more complex backflow risks and should not be used in high hazard properties.

Vacuum Breakers

Vacuum breakers prevent backflow by allowing air into the system when negative pressure occurs. This stops contaminated water from being drawn back into the potable water supply. They are ideal for applications where water usage is intermittent.

There are two main types: atmospheric vacuum breakers (AVBs) and pressure vacuum breakers (PVBs). AVBs are typically installed on hose bibs and taps, while PVBs are used in irrigation systems and require testable certification. Regular inspection ensures these devices remain effective.

Break Tanks

Break tanks isolate the water supply by storing water in a separate tank before it is re-pressurised for use. This method prevents contaminated water from flowing back into the main water supply through a complete physical disconnection.

Break tanks are often used in commercial properties, high-rise buildings, and locations with variable water pressure. The tank breaks the direct connection between the clean water supply and the downstream water, ensuring safety during a water main break or back pressure event.

Barometric Loops

A barometric loop is a vertical loop of piping rising at least 7.6 metres above the highest downstream outlet. It uses elevation to prevent back-siphonage and is considered a non-mechanical method of backflow prevention.

While rarely used in domestic settings due to height requirements, barometric loops can be effective in industrial systems dealing with large amounts of water. They provide a passive barrier without relying on moving parts or devices that require testing.

Why Backflow Prevention Matters

Backflow occurs when contaminated water flows back into the clean water supply, typically due to a sudden change in water pressure or a backflow event. Without a properly installed backflow preventer, harmful substances from sources like irrigation systems, fire services, or even the sewer line can be drawn into the potable water supply. This contamination poses significant health risks to homes, businesses, and the broader community.

Installing a backflow prevention device is a critical component of maintaining a safe water supply system. These devices protect the drinking water supplies by creating a physical or mechanical barrier that prevents reverse flow. Backflow can occur in any setting—residential, commercial, or industrial—whenever water pressure and flow are disrupted. The dangers of backflow include the potential for chemical contamination, microbial infiltration, or exposure to pollutants from non-potable sources.

To prevent these issues, property owners must install a backflow preventer suitable to the hazard rating of the application. This ensures that safe drinking water is consistently delivered, and the home’s water supply remains free from pollutants. A correctly chosen and maintained backflow device will block contaminated water from flowing back into the clean supply system.

Common triggers of backflow include:

  • A drop in pressure in the main water supply
  • Water main breaks or repairs
  • High demand on fire service lines
  • Pressure fluctuations in non-potable systems
  • Faulty or incorrectly installed containment devices

Whether you’re protecting a garden irrigation line or an industrial water service, selecting the right type of device and ensuring regular testing are vital steps in preventing a backflow event.

Importance of Hiring Licensed Plumbers in Brisbane

In Brisbane, only licensed plumbing contractors are permitted to carry out the installation of a backflow prevention device. This is due to the technical skill required to match the correct type of preventer to the hazard level of the water system and ensure the installation complies with local regulations.

Hiring a licensed plumber is not just a legal requirement—it’s essential for ensuring your water supply system remains safe and operational. Backflow occurs when water flows in the opposite direction from its intended path, and an unqualified installer might fail to account for key factors such as water pressure and flow dynamics, the location of the water meter, or proximity to drainage systems.

Why you need a licensed plumber to install and maintain backflow devices:

  • They understand the hazard rating of each supply line
  • They’ll select the right backflow preventer for the application
  • They ensure the device is installed to meet council and national plumbing codes
  • They can conduct annual testing of testable backflow prevention devices
  • They’ll maintain and repair the device to ensure continued performance

A professional plumber will also identify complex backflow risks that may not be obvious, especially when multiple water connections are involved. From homes to high-risk commercial sites, hiring a licensed plumber is the best way to ensure your backflow installation is safe, compliant, and effective.

To ensure your water remains clean and safe, trust a licensed Brisbane plumber to handle every aspect of the installation of a backflow prevention device—from assessment to installation and ongoing maintenance.

Conclusion

Backflow prevention is essential to keeping Brisbane’s water supplies safe and clean. With various devices and methods available—from air gaps and check valves to RPZs and break tanks—the right solution depends on the hazard level, water usage, and system design. Regular testing, maintenance, and installation by a backflow accredited professional ensure that the device remains effective and compliant with local regulations.

If you’re unsure which device must be installed or need your device tested, contact AC Plumbing today. We’re your trusted experts in installing and maintaining accredited backflow prevention devices across Brisbane.

Frequently Asked Questions

How does an air gap prevent backflow?

An air gap prevents backflow by creating a physical, vertical space between the water outlet and the highest possible water level in a fixture. This separation ensures that contaminated water cannot be siphoned or forced back into the potable water supply, even if there is a drop in water pressure or a reversal of flow direction.

What are the advantages of using an RPZ assembly?

RPZ assemblies offer robust protection against both backpressure and backsiphonage, making them highly reliable in various applications. They are suitable for high-risk environments, handle significant pressure variations, and are often required by plumbing codes. Their design ensures consistent, hassle-free protection for potable water systems, especially where chemical or biological contaminants may be present.

Can you explain the difference between a PVB and an AVB?

A Pressure Vacuum Breaker (PVB) can be used under continuous pressure and is designed for systems that remain pressurized, such as irrigation lines. An Atmospheric Vacuum Breaker (AVB) is only for non-continuous use and cannot be under pressure for more than twelve out of twenty-four hours, making it suitable for intermittent applications like hose bibs.

How often should backflow prevention devices be tested?

Backflow prevention devices should be tested annually by certified professionals to ensure proper operation and compliance with regulations. Regular testing detects wear, malfunction, or failure, helping to prevent contamination of potable water. Testing frequency may vary based on local codes, device type, and system application, but yearly inspection is the standard.

What are the common hazards associated with backflow?

Common hazards include contamination of drinking water with chemicals, bacteria, or other pollutants due to backflow. This can occur from improperly installed or poorly maintained devices, pressure surges, or sudden drops in supply pressure, potentially leading to waterborne disease outbreaks or widespread public health risks.

Enquire Online for a QUICK Response!

Why Choose Us?

  • Fully Licensed & Insured
  • Prompt Service
  • Honest, Friendly Plumbers
  • Lifetime Warranty*
  • Fixed Pricing

Reviews

steve-goodwin
Steve Goodwin

★★★★★

Contacted by Facebook 7pm to ask about fixing a concealed leak. Responded almost immediately, organised to come out next day. Turned up earlier, found the leak quickly and fixed that, as well as upgrading some taps, and replacing a water pump…
Megan Fisher

★★★★★

The AC team were great. From the very first phone call with Leanne to Andrew turning up the team were professional and friendly. Andrew made helpful observations and did a great (and fast) job of getting the job done.
Kevin Perry

★★★★★

Highly recommend. I called AC Plumbing at 11:30am to get a quote on replacing a Hot Water system. They were there in 30 minutes and the quote was very reasonable. I booked with them straight away and the job was done in under 4 hours…
Scroll to Top